1
Discussion - EVE / Re: Circuit to Connect to Audio Output Pin
« on: April 25, 2021, 02:21:53 PM »
I see, so it will work with 0.5W 8Ohm type of speaker, I will try with SMD speaker soldered onboard.
Thank you
Thank you
Welcome to the Bridgetek Community!
Please read our Welcome Note
Technical Support enquires
please contact the team @ Bridgetek Support
Please refer to our website for detailed information on all our products - Bridgetek - Bridging Technology
API_LIB_BeginCoProList();
API_CMD_DLSTART();
API_CLEAR_COLOR_RGB(0, 0, 0);
API_CLEAR(1,1,1);
API_BITMAP_HANDLE(14);
API_BITMAP_SOURCE(-1252);
API_BITMAP_LAYOUT(L1,3,25);
API_BITMAP_SIZE(NEAREST, BORDER, BORDER, 18,25);
// LCD display parameters
UINT16 lcdWidth = 800; // Active width of LCD display
UINT16 lcdHeight = 480; // Active height of LCD display
UINT16 lcdHcycle = 928; // tot length of line (hoffset + data + front porch)
UINT16 lcdHoffset = 88; // start of active/data line ((hsync1 - hsync0) + back porch)
UINT16 lcdHsync0 = 0; // start of hsync
UINT16 lcdHsync1 = 48; // end of hsync
UINT16 lcdVcycle = 525; // total number of line (voffset + data + front porch)
UINT16 lcdVoffset = 32; // start of active/data line ((vsync1 - vsync0) + back porch)
UINT16 lcdVsync0 = 0; // start of vsync
UINT16 lcdVsync1 = 4; // end of vsync
UINT8 lcdPclk = 2; // Pixel Clock = 60 MHz / 2 = 30 MHz (LCD spec min-typ-max 20-33-50MHz)
UINT8 lcdSwizzle = 0; // Define RGB output pins
UINT8 lcdPclkpol = 1; // PCLK polarity is on the falling edge