4
« on: October 24, 2019, 02:51:02 PM »
This is all with D2XX firmware...
I do have somewhat better luck on a forth computer. On this one, it only sometimes loses connection either inside Eclipse or from the .bat file after selecting the programmer and hitting the "Next" button on the FT9xx Programming Utility one-wire interface dialog.
At this point, it sometimes works and populates the D2XX tab, but more often it says "There is no response from the MCU. Please check the connections (power, data) and try again. Now, I can hit the "Scan for device" button and it will sometimes populate the D2XX tab.
But, sometimes it freezes and Eclipse freezes too. At this point, you need to CTRL-ALT-DEL and end the task Eclipse task to recover...
I think I'm going to never use the programming utility from inside of Eclipse.
Instead, I'll use it with this: FT900Prog GUI Launcher.bat
located here: C:\Program Files (x86)\Bridgetek\FT9xx Toolchain\Toolchain\programmer\dist
I don't know how or why, but the one inside Eclipse does not work or does not work as well, at least on the four Win10 PCs I've tried it on...