Hello,
we try to get the BT81x run with a font set, contained in the BT81x flash. We converted the font set with the asset tool, loaded the glyph to 4096 ff and the .xfont to G-Ram, put this to flash_fast. So far so good.
The font basically works, but it does not show up all characters, although they are contained in the font set. (we talk about characters on the first byte, 0 - 0xFF).
A small test program, displaying characters between 0 to 255 (using CMD_TEXT) should show everything, containing in the font set which is mapped in this range.
But it it shows characters between 0 to 190 properly, above it shows wrong characters (which is in the font set but on a different mapping), some show up nothing and some cause a crash on the BT81x and needs a reset.(which are some extra characters used for German language)
Seems that the xfont file points to the wrong glyph, or to no-where.
the source font set works under windows with all characters properly and seems to be correct. The font set is completely converted with the asset manager (without the .txt file)
Is this a known issue, maybe of your font conversion tool?
What can I do, need the German extra characters mapped to the 'correct' codes.
Has anybody tried getting a unicode font set in the complete range (we talk about 1 Byte, 0 to 0xFF) wit the right mapping to work with CMD_TEXT? What can I do, did I miss something?
would really appreciate your help. Tried to contact your support per mail, unfortunately no response so far.
Juergen