BRT Community
General Category => Discussion - EVE => Topic started by: fluidcontrol on August 23, 2020, 07:43:55 PM
-
Hello,
Is there an official parts library from Bridgetek (or FTDI) for CAD/CAE software?
It's not about that you can not create it yourself but maybe there is one official "error free".
Thank you
-
Hello,
We have a document which gives details of the footprints. Here is a link to the document,
https://brtchip.com/wp-content/uploads/Support/Documentation/Technical_Notes/ICs/MCU/BRT_TN_004%20Bridgetek%20Example%20IC%20PCB%20Footprints.pdf (https://brtchip.com/wp-content/uploads/Support/Documentation/Technical_Notes/ICs/MCU/BRT_TN_004%20Bridgetek%20Example%20IC%20PCB%20Footprints.pdf)
Best Regards,
BRT Community
-
Thank you. I already used it to make my own part but it was time consuming (64 pins schematic, 64 pin footprint, 3D model). :)