BRT Community

General Category => Discussion - EVE => Topic started by: progchip on March 24, 2022, 09:26:21 AM

Title: When creating a custom font, I can not add a gap symbol "SPACE".
Post by: progchip on March 24, 2022, 09:26:21 AM

When creating a custom font, I can not add a gap symbol.
Hello. I'm trying to create a custom font with Eva. Adding a space character to a set leads to an error. Symbols for conversion are taken from the file "0123456789". The last symbol space. Settings in the picture in the attachment.
Please help solve the problem.
I am use the EVE Assert Builder v2.5.1

Title: Re: When creating a custom font, I can not add a gap symbol "SPACE".
Post by: BRT Community on March 24, 2022, 11:54:26 AM

Hello,

Thank you for your question.

We have recently become aware of this issue where EAB reports the failure to convert a space character, the development team are curranty updating EAB to resolve this issue.


However the developers have noted that this should not affect the customer font when utilized in your application, you should be able to use the SPACE character in CMD_TEXT for example. Alternately you can utilize the hex representation of the ASCII character (0x21) in CMD_TEXT:

Please see attached for an example of a custom font being utilised where EAB has reported that the space character has failed to convert.

Best Regards,
BRT Community

Title: Re: When creating a custom font, I can not add a gap symbol "SPACE".
Post by: progchip on March 24, 2022, 03:11:44 PM

Thanks a lot! This is work!!!