BRT Community
General Category => Discussion - Cleo => Topic started by: KIMs on July 18, 2019, 01:32:14 AM
-
Hi,
I am studying using the CLEO50 module.
While testing a program that outputs BMP files to the screen,
The screen changes as shown below.
Note that the size of the bmp file is over 1M bytes.
Thereafter, no operation is performed.
However, the firmware upgrade is normal.
Is there a way to fix it?
-
Hello,
This issue occurs when accidently loading a Cleo35 sketch onto a Cleo50. Please see below for instructions on how to resolve this issue and a BIN file for re-flashing the Cleo50.
Instructions:
ftp://ftp.ftdichip.com/CES/CleO/Cleo50%20restore.pdf (ftp://u45902898-ide:Ftd1$erv@ftp.ftdichip.com/CES/CleO/Cleo50%20restore.pdf)
BIN File:
ftp://ftp.ftdichip.com/CES/CleO/CleO_Factory_Firmware%2050fix.bin (ftp://u45902898-ide:Ftd1$erv@ftp.ftdichip.com/CES/CleO/CleO_Factory_Firmware%2050fix.bin)
Best Regards,
BRT Community
-
:)
Everything works well !!
Thanks a lot~~