Hello,
[edit to add the image]
Welcome to the BRT Community,
We have a couple of examples on our Github which you could look at,
This example supports many different MCUs and we have recently added an STM32 CUBE IDE project, here is the link for the overall repository and a link to the project file.
https://github.com/Bridgetek/EVE-MCU-BRT_AN_025/tree/mainhttps://github.com/Bridgetek/EVE-MCU-BRT_AN_025/tree/main/examples/simple/STM32CUBEIf you download and unzip the full BRT_AN_025 code from the first link above, you can then open the project by browsing to the folder in the second link above within your download. This has the project file. We used the STM32F0 Discovery board and so some edits may be needed, I'll post an image of the hardware connection but we can also email you a document covering the code (please contact support.emea@brtchip.com)
A second project is our ESD porting guide which uses CUBE IDE, you can find a full document and code at this link on Github
https://github.com/Bridgetek/BRT_AN_073-ESD-exported-Project-Porting-GuideThis is for exporting the EVE Screen Designer project to C code for our FT900 MCUs and then porting to other platforms.
Rudolph also has a comprehensive library and examples for EVE which covers many different MCUs including STM32 and is worth checking out too,
Best Regards, BRT Community