Hello
Thank you for the response.
I know this example and this is running and i'm testing with this. I want to try to inject test data between the input from the camera to the ft90x and the output to usb so that it looks like a testpattern from the camera.
I think i have to make the change in the function " void cam_ISR(void) " at " :"r"(urb->ptr), "r"(&(CAM->CAM_REG3)), "r"(to_read)); "
How can i make red, blue, yellow, green etc bars? Are the values somewhere explained and how the lines are stored so that i can change it, the used format from the camera side is ycbcr422 / yuy2?
Thanks in advance.
Regards twittich