BRT Community
General Category => Discussion - EVE => Topic started by: AT38 on July 23, 2020, 03:53:48 PM
-
BT815's Display Enable (DE) output is active positive.
I am trying to use a display with an ILI9806E driver which requires Display Enable to be active low.
How do I change the polarity of DE so that it is compatible with this display driver?
Thanks
-
Hello,
Unfortunately it is not possible to alter the polarity of the DE pin on the BT81x.
In such a case you would need to employ an Invertor IC.
Best Regards,
BRT Community