Hi,
Just to update, We were able to fill RAM_DL to 7964 by using text commands with this string (on BT817)
"123456789\u00B0123456789\u00B0123456789\u00B0"
We will try the NOPs and your other string too to see if we can see the issue, and will update you,
Best Regards, BRT Community
- May 07, 2024, 10:46:52 AM
- Welcome, Guest
News:
Welcome to the Bridgetek Community!
Please read our Welcome Note
Technical Support enquires
please contact the team @ Bridgetek Support
Please refer to our website for detailed information on all our products - Bridgetek - Bridging Technology
61
on: March 19, 2024, 10:25:45 AM
|
||
Started by TreeOone - Last post by BRT Community | ||
62
General Category / Discussion - EVE / Re: EAB, ASTC output files: how can I see the content of a ".raw" file?
on: March 19, 2024, 06:07:41 AM
|
||
Started by linuxfan - Last post by linuxfan | ||
Really nobody can give me a hint?
|
63
on: March 18, 2024, 12:09:06 PM
|
||
Started by TreeOone - Last post by Craggan | ||
Oh god, thanks for the tip. I copied it out from an example without thinking.
|
64
on: March 18, 2024, 10:39:14 AM
|
||
Started by TreeOone - Last post by Rudolph | ||
cmd_text( 10, 10, 1, 0, "\u00D6sterreicher \u00E4rgern sich \u00FCber \u00E4gypter"); Besides the issue, that is an odd way to work with strings. I just use UTF-8 encoding for my source files, so in this case I would have "Österreicher ärgern sich über Ägypter" in the text. |
65
on: March 17, 2024, 05:24:41 PM
|
||
Started by Craggan - Last post by Craggan | ||
EAB 2.10.2 |
66
on: March 16, 2024, 06:08:01 PM
|
||
Started by Craggan - Last post by BRT Community | ||
Hi,
Could you please advise what settings you used to convert the font in EVE Asset Builder and also which version of the EAB you use? Best Regards, BRT Community |
67
on: March 16, 2024, 01:10:26 PM
|
||
Started by Craggan - Last post by Craggan | ||
Hi there,
is there a failure in the font converter? When i create UNICODE fonts bigger than 18 the distance between the letters are to big, please see attachment. In this case font "Ubuntu". Or am i wrong? |
68
on: March 16, 2024, 01:00:26 PM
|
||
Started by TreeOone - Last post by Craggan | ||
Just testing Unicode strings.
The cmd_text() row also floods the screen. One word less at the end and it works, but the screen flickers. EVE_cmd_setfont2( 1, EVE_RAM_G, 0 ); cmd_text( 10, 10, 1, 0, "\u00D6sterreicher \u00E4rgern sich \u00FCber \u00E4gypter"); 20 rows with 2 or 3 Umlauts in 1 line are OK. More then 3 Umlauts in 1 line kill. |
69
on: March 12, 2024, 06:31:51 PM
|
||
Started by TreeOone - Last post by Rudolph | ||
I have a RVT70HSBNWC00-B and I am using the exact same controller board with it, I only modified the regulator for the backlight to only do 5V since this is what the RVT70HSBNWC00-B requires while the RVT101HVBNWC00-B needs 7...14V for the backlight.
So on my side the same controller on the same board and therefore the exact same software using the same compiler etc. With the 1024x600 RVT70HSBNWC00-B I can increase the NOPs to 1794 which results in a display list of 7272 bytes. One more and it starts to flicker. |
70
on: March 12, 2024, 04:34:02 PM
|
||
Started by TreeOone - Last post by BRT Community | ||
Hi,
We will test out and investigate this also and keep you updated, thanks for your additional test results Rudolph, Best Regards, BRT Community |