31
Discussion - EVE / Re: unified blob in BT815
« on: August 13, 2019, 08:51:39 PM »
For what it's worth...
I'm in the same situation here, and loosely following the advice here I was able to include the unified blob into my MCU firmware and then write it to the flash through the EVE.
After writing the blob to the first 4K of flash while in basic mode, I was able to successfully switch to full mode.
Not how I'd handle manufacturing, but enough to validate that the prototype is working. A separate method for loading larger datasets to flash will need to come, and instead of using CANbus (which is also an option at my disposal) I'll probably have to do it through the MCU using the programming header for data transfer.
I'm in the same situation here, and loosely following the advice here I was able to include the unified blob into my MCU firmware and then write it to the flash through the EVE.
After writing the blob to the first 4K of flash while in basic mode, I was able to successfully switch to full mode.
Not how I'd handle manufacturing, but enough to validate that the prototype is working. A separate method for loading larger datasets to flash will need to come, and instead of using CANbus (which is also an option at my disposal) I'll probably have to do it through the MCU using the programming header for data transfer.