Hello,
thank you for your answer. I don't want to use the glyph file in RAM_G but save it on an external flash and only load the xfont file into RAM_G. With this file I can then address the graphic data. I convert the data for the flash with the EAB Flash Utilities and load it via the map file into the ESE, just like I would do it on the hardware or have done so far.
This worked without any problems for me so far, only with the mentioned symbols it still does not work.
I have attached my setting of the EAB and the use of the font in the ESE. To show that my approach works basically I added some symbols from lower code pages.
Because the used symbols maybe hard to see in the screenshot, here is the code in text form:
CLEAR(1, 1, 1)
CMD_SETFONT2(0, 0, 0)
CMD_TEXT(59, 41, 0, OPT_FORMAT, "%c%c BC", 129091, 65)
CMD_BUTTON(51, 104, 100, 30, 0, OPT_FORMAT, "%c", 129091)
CMD_TEXT(25, 160, 0, 0, "♪☣⛇∰⌚🡃")
Regards
Simon