BRT Community

General Category => Discussion - MCU => Topic started by: Scott Chiu on August 09, 2023, 09:04:02 AM

Title: FT90X USB HOST example code.
Post by: Scott Chiu on August 09, 2023, 09:04:02 AM

Hello,
Is it possible to connect a vendor-specific device to the FT90X? I want to use it as the host to communicate with a WinUSB device. Is there an example available to demonstrate how to communicate with a WinUSB device?

Title: Re: FT90X USB HOST example code.
Post by: BRT Community on August 11, 2023, 10:42:35 AM

Hello,

We have some examples on this page below on our website:
https://brtchip.com/software-examples/ft9xx-examples/

We also have some examples in this application note:
https://brtchip.com/wp-content/uploads/sites/3/2021/07/AN-360-FT9xx-Example-Applications.pdf

You can also host your own devices by using our provided examples above as a reference in combination with the API / USB Request spec for your particular device. Which type of device is it that you are hosting and which USB class does it use?

Best Regards, BRT Community