1
Discussion - EVE / Re: Modifying ESD project to work in low power environment with RTOS
« on: December 02, 2022, 01:33:05 PM »
Thanks for the answers. I've been working on other projects for a while, but I'm getting back to this again.
This clarifies matters a bit. I think I'll be able to get this working now.
@Domdom I'm getting RF packets from industrial machines as one data source. That will be pre-processed by the microcontroller and result in "sensor-like" readings in some cases. I also have physical "soft button" membrane switches around the edges of the screen. The reason we don't use touch is because it might be unreliable and prone to failure in a factory environment.
This clarifies matters a bit. I think I'll be able to get this working now.
@Domdom I'm getting RF packets from industrial machines as one data source. That will be pre-processed by the microcontroller and result in "sensor-like" readings in some cases. I also have physical "soft button" membrane switches around the edges of the screen. The reason we don't use touch is because it might be unreliable and prone to failure in a factory environment.