Hi,
I try to upload some RAW graphic files to the GRAM of the FT800.
It is some old project that needs a gui update. Until now I had only one jpeg sucessfully loaded with CMD_LOADIMAGE, this works but now I need to place several graphics in raw (RGB565) format.
When using a jpeg there is the load_image command before loading the file into the command buffer.
But I can't find any command for raw
The commands to handle the image when its already in the ram are quite clear to me:
Ft_App_WrCoCmd_Buffer(disp_host, BEGIN(BITMAPS));
Ft_App_WrCoCmd_Buffer(disp_host, BITMAP_HANDLE(id));
Ft_App_WrCoCmd_Buffer(disp_host, BITMAP_SOURCE(RAM_G + offset));
Ft_App_WrCoCmd_Buffer(disp_host, BITMAP_LAYOUT(RGB565, 100, 50));
Ft_App_WrCoCmd_Buffer(disp_host, BITMAP_SIZE(NEAREST, BORDER, BORDER, 100, 50));
Ft_App_WrCoCmd_Buffer(disp_host, VERTEX2II(0, 0, id, 0));
But how do I put the bitmap to the position (RAM_G + offset) in VRAM?
I had tryed Ft_Gpu_Hal_WrMem(phost, (RAM_G + Offset), ....) but it doesn't work.
I will be grateful for any advice!
Best regards,
Philipp