General Category > Discussion - EVE

Want to use ESD 4.14.0 with BT817Q and 512MB Flash (Riverdi 7" Display)

<< < (4/4)

BRT Community:
Hello,



--- Quote from: J369 on January 04, 2022, 03:48:49 PM ---Hello,

I am now more leaning towards changing my controller to stm32 as that will support EVE Screen Designer.
Can you please help me suggesting the latest controller that I should select to match with my display and with EVE Screen Designer project that can include animations, UART comm. with main controller and may be update firmware over uart if required. Can you please suggest one?


--- End quote ---

Sorry, just to clarify are you looking for a recommendation on which STM32 controller you should utilze?

Please also note when utilizing the STM32 with ESD you will still be required to manually port the code output from ESD to the STM32, you cannot directly upload the code produced from ESD to the controller.

Best Regards,
BRT Community

J369:

--- Quote from: BRT Community on January 11, 2022, 12:12:05 PM ---Hello,



--- Quote from: J369 on January 04, 2022, 03:48:49 PM ---Hello,

I am now more leaning towards changing my controller to stm32 as that will support EVE Screen Designer.
Can you please help me suggesting the latest controller that I should select to match with my display and with EVE Screen Designer project that can include animations, UART comm. with main controller and may be update firmware over uart if required. Can you please suggest one?


--- End quote ---

Sorry, just to clarify are you looking for a recommendation on which STM32 controller you should utilze?

Please also note when utilizing the STM32 with ESD you will still be required to manually port the code output from ESD to the STM32, you cannot directly upload the code produced from ESD to the controller.

Best Regards,
BRT Community

--- End quote ---

Yes I am looking for recommendation. What could be the best choice of controller to use with ESD so I can speed up my development time.
I would like to just upload the code right from ESD and make the development faster. Any options? Or any best suited process steps to minimize the development timeline?

Thank you.

BRT Community:
Hello,


--- Quote from: J369 on January 11, 2022, 03:25:25 PM ---
Yes I am looking for recommendation. What could be the best choice of controller to use with ESD so I can speed up my development time.
I would like to just upload the code right from ESD and make the development faster. Any options? Or any best suited process steps to minimize the development timeline?

Thank you.

--- End quote ---

In this instance I would recommend our FT9XX series of MCUs, these are natively supported in EVE Screen Designer with the generated application code available for direct upload to the MCU without any porting required.

Please see the following page for details on the FT9XX series:
https://brtchip.com/ic-module/applications/mcu/

Development modules are also available:
https://brtchip.com/ic-module/product-category/products/modules/mcu/

Best Regards,
BRT Community

Navigation

[0] Message Index

[*] Previous page