Text only | Text with Images

BRT Community

General Category => Discussion - EVE => Topic started by: Cyrilou on April 08, 2021, 03:36:14 PM

Title: cmd_fillwidth not supported by ESD label in ESD 4.10
Post by: Cyrilou on April 08, 2021, 03:36:14 PM
Function is declared but not used and it's the same for OPT_FILL options argument.
Title: Re: cmd_fillwidth not supported by ESD label in ESD 4.10
Post by: BRT Community on April 15, 2021, 09:26:02 AM
Hello,

These are known limitations.

ESD label is not providing the support to all the parameters from hardware commands.

We will work on this in future.

Best Regards,
BRT Community
Title: Re: cmd_fillwidth not supported by ESD label in ESD 4.10
Post by: Cyrilou on April 16, 2021, 02:56:02 PM
This would be very useful to enter a text without make a "\n" when text is too large. If we have sentences translations it's impossible to manage...
Title: Re: cmd_fillwidth not supported by ESD label in ESD 4.10
Post by: BRT Community on April 20, 2021, 04:57:45 PM
Hello,

Thanks for the feedback. I will pass to our R&D team for consideration.

Best Regards,
BRT Community
Title: Re: cmd_fillwidth not supported by ESD label in ESD 4.10
Post by: Cyrilou on June 10, 2021, 10:59:03 AM
Hello,

Do you have news on this? Did your R&D team made some code that I could use in advance to implement it?
Title: Re: cmd_fillwidth not supported by ESD label in ESD 4.10
Post by: BRT Community on June 11, 2021, 10:58:45 AM
Hello,

The developers are still looking into resolving this issue in a future release of ESD.

Best Regards,
BRT Community
Text only | Text with Images