Text only | Text with Images

BRT Community

General Category => Discussion - MCU => Topic started by: scoprioprise on November 12, 2019, 11:14:18 AM

Title: OTP programming can be triggered unconciously?
Post by: scoprioprise on November 12, 2019, 11:14:18 AM
Hi, I'm working on a custom board with FT900, I have a problem that seems to be like I've triggered the OneTimeProgram setup.
How can I detect if I'm in that situation?

Program is still in (so hw is good) and working, but I cannot change it anymore.
The Eclipse cannot recognize device, ftdi programmer shows a BLANK space where shall write "FT900" when abel to program.

Any help?
Title: Re: OTP programming can be triggered unconciously?
Post by: BRT Community on November 13, 2019, 04:31:45 PM
Hello,

You have already emailed our support team on this issue.

Feel free to post any resolution here to help other forum users.

Best Regards,
BRT Community
Title: Re: OTP programming can be triggered unconciously?
Post by: alicebooth on July 15, 2024, 06:58:26 PM
Quote from: scoprioprise on November 12, 2019, 11:14:18 AM
Hi, I'm working on a custom board with FT900, I have a problem that seems to be like I've triggered the OneTimeProgram setup.
How can I detect if I'm in that situation?

Program is still in (so hw is good) and working, but I cannot change it anymore.
The Eclipse cannot recognize device, ftdi programmer shows a BLANK space where shall write "FT900" when abel to program.

Any help?

did you ever get this resolved
Text only | Text with Images