BRT Community
General Category => Discussion - EVE => Topic started by: Matrix Orbital on June 22, 2020, 11:25:04 PM
-
Another member in the EVE3x family, 3.9" 1U 480x128 1000nit sunlight readable display! Available in non-touch, resistive touch and capacitive (coming soon!)
EVE3x-39A
https://www.matrixorbital.com/eve3x-39a (https://www.matrixorbital.com/eve3x-39a)
(https://www.matrixorbital.com/image/cache/catalog/products/EVE/EVE3x-39A-800-600x600.jpg)
The new EVE3x series features:
- Expanded PCB for easy mounting
- Enhanced ESD protection
- On-Board NOR Flash up to 128mb
- EVE3 IC
NEW Optional Features:
- USB interface using the FTDI FT232H
- Haptic feedback
- Speaker
(https://www.matrixorbital.com/image/cache/catalog/products/EVE/EVE3x-39A-Back-800-600x600.jpg)
-
That board is stuffed, wow. :-)
And as it is one of the more exotic modules I just added profiles for EVE3x-39A/EVE3x-39G to my library:
https://github.com/RudolphRiedel/FT800-FT813
The only deviation from your settings in the EVE3x-39-Manual.pdf is that I set the value for REG_PCLK to 7 instead of 5
as this results in 68 FPS @ 72MHz.
But as I just realize, the timing parameters on page 16 are not quite correct, or are they?
At least the HSIZE of 482 must be a typo.
And the HOFFSET of 16 seems to be really low, usually HOFFSET is about 4x at 480x272.
Plus HSYNC1 should be less than HOFFSET.
I would rather expect:
HSYNC1 = 41
HOFFSET = 43
-
Thanks for the feedback. Let me double check the manual!
-
The manual has been updated.
https://www.matrixorbital.com/index.php?route=extension/module/product_downloads/get&did=1657