BRT Community

General Category => Discussion - Cleo => Topic started by: KIMs on July 18, 2019, 01:32:14 AM

Title: CLEO50 did not work..
Post by: KIMs on July 18, 2019, 01:32:14 AM

Hi,
I am studying using the CLEO50 module.
While testing a program that outputs BMP files to the screen,
The screen changes as shown below.
Note that the size of the bmp file is over 1M bytes.
Thereafter, no operation is performed.
However, the firmware upgrade is normal.
Is there a way to fix it?

Title: Re: CLEO50 did not work..
Post by: BRT Community on July 18, 2019, 11:37:24 AM

Hello,

This issue occurs when accidently loading a Cleo35 sketch onto a Cleo50. Please see below for instructions on how to resolve this issue and a BIN file for re-flashing the Cleo50.

Instructions:
ftp://ftp.ftdichip.com/CES/CleO/Cleo50%20restore.pdf (ftp://u45902898-ide:Ftd1$erv@ftp.ftdichip.com/CES/CleO/Cleo50%20restore.pdf)

BIN File:
ftp://ftp.ftdichip.com/CES/CleO/CleO_Factory_Firmware%2050fix.bin (ftp://u45902898-ide:Ftd1$erv@ftp.ftdichip.com/CES/CleO/CleO_Factory_Firmware%2050fix.bin)

Best Regards,
BRT Community

Title: Re: CLEO50 did not work..
Post by: KIMs on July 29, 2019, 12:49:33 PM

 :)
Everything works well !!
Thanks a lot~~