Hello Fellow Bridgetek Users,

For a new project I have elected to use a Riverdi 7" capacitive touch display that has a BT817Q.
For reference these are links to the display and STM32 Eval board.
https://riverdi.com/product/eve4-intelligent-display-rvt70hsbfwca0-7-inch-projected-capacitive-touch-panel-air-bonding-atouch-frame/
https://riverdi.com/product/stm32-evaluation-board/

So far I have been following a user guide for Riverdi's STM32 board on how to connect PC to STM32 and STM32 to 7" inch display over a USB to SPI bridge.
My issue is that no matter the jumper configuration our display is not appearing under the devices tab in screen editor.
The users guide shows that this device should appear as RS232 HS() in screen editor, but it only appears this way under device manager.

An initial thought was that the issue may have been admin/firewall settings but I tested this on an alternate PC with all privileges with no success.

Any and all help is appreciated.
Thank you,
MattF