News:

Welcome to the Bridgetek Community!

Please read our Welcome Note

Technical Support enquires
please contact the team
@ Bridgetek Support

Please refer to our website for detailed information on all our products - Bridgetek - Bridging Technology

Main Menu

Flash Blob for BT815 vs BT817

Started by david, January 04, 2024, 07:55:04 AM

Previous topic - Next topic

david

Hello,

there are 2 different blobs: "bt815.blob" and "bt817.blob" in the EVE Asset Builder. What is the difference between them? I am interested in a feature list, which requires the bt817 blob instead of the bt815 blob when used with a BT817 chip.
If my tests were correct it seems that the bt815.blob is compatible with BT815 and with BT817 (both go successfully into full mode), but bt817.blob seems to just be compatible with BT817 and if used with a BT815 it does not go into full mode.

I am asking that because I am using both BT815 and BT817 in production and would like to share the same external flash data for both. So it seems to work fine for be when just using the bt815.blob, but I would like to know if there are any disadvantages for the BT817 in that case.

david

Any information about differences and especially compatibility of the BT815 and BT817 blob file from Eve Asset Builder would be appreciated.

BRT Community

Hi David,

We're just checking with our R&D team and will let you know as soon as possible,

Best Regards, BRT Community

david

Hi, did you get any new information about that compatibility topic?