unified blob in BT815

[Rudolph]

>That typo is not seen on my version EAB 1.0.  You might be using old version.

No, I am not, I am using EAB 1.0.

I started EAB, it said 1.0.
I erased it, installed it again, tried to flash unified.blob again and the log still ended with "Existing ...".
So I downloaded the archive from https://brtchip.com/eve-toolchains/#EVEAssetBuilder again,
compared the files, the fresh EVE-Asset-Builder-setup-1.0.exe is 100% the same as the one I downloaded earlier.
I installed it again: "Existing ..."
I erased the folder again, installed it again: "Existing ..."
I opened the folder C:\Users\Ich\Documents\EVE Asset Builder opened a shell, executed progflash.exe.

C:\Users\Ich\Documents\EVE Asset Builder>progflash
Welcome to BT81X Flash Programming Utility V0.0.5

C:\Users\Ich\Documents\EVE Asset Builder>progflash module MPSSE newblob unified.blob
Information on channel number 0:
Flags=0x2
...
Error, Flash is not able to get into full mode
Fail to write Blob file "unified.blob" to BT81X Flash Storage
Existing ...