BRT Community

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the Bridgetek Community!

Please read our Welcome Note

Technical Support enquires
please contact the team
@ Bridgetek Support

Please refer to our website for detailed information on all our products - Bridgetek - Bridging Technology

Author Topic: Winstar BT81x modules  (Read 446 times)

Rudolph

  • Sr. Member
  • ****
  • Posts: 424
    • View Profile
Winstar BT81x modules
« on: November 12, 2024, 04:59:31 PM »

I am always looking for EVE modules to include support for in my library and I just found these from Winstar:

WF43WTYBEDST0 - 4.3" IPS 480x272 resistive touch, BT816
WF43WTYBEDSG0 - 4.3" IPS 480x272 capactice touch, BT815
WF50FSYBGDST0 - 5.0" IPS 800x480 resistive touch, BT816
WF50FSYBGDSGA - 5.0" IPS 800x480 capacitive touch, BT815

These might be Arduino shields and these might come in different versions.
Like with a SD socket, Arduino pins soldered in or a flash-chip - but none of these options are in the datasheets I found.

There is a 20pin header (FFC connector not populated) that looks like Winstar started with the pinout from Riverdi,
but pins 9 to 16 are different.
There is no Audio Out, the IOs are different and there are CSCL, CSDA, CRST and CINT pins for the ILI2130 CTP.

I wonder if the CTP is even connected to the BT815.

I am curious, but I can not find a distributor I would buy these from.
And Winstar only offers a short-form datasheet on their website.

Has anyone played with these?


« Last Edit: November 13, 2024, 03:30:04 PM by Rudolph »
Logged