News:

Welcome to the Bridgetek Community!

Please read our Welcome Note

Technical Support enquires
please contact the team
@ Bridgetek Support

Please refer to our website for detailed information on all our products - Bridgetek - Bridging Technology

Main Menu

Tech Tip #5 - Improve User Experience with Audio Feedback

Started by BRT Marketing, November 18, 2026, 02:44:12 AM

Previous topic - Next topic

BRT Marketing

Do you know?
A simple touch beep or tone can dramatically improve perceived responsiveness in an HMI (Human Machine Interface). Generating and fine-tuning good quality sound effects on an MCU via PWM or DAC can be challenging and adds workload to the MCU, or may even require connecting a specialised audio IC.
The Bridgetek Embedded Video Engine (EVE) is here to help though. In addition to full colour graphics and touch, the onboard audio engine allows you to play ready-made sound effects with just a few register writes. Simply select the sound effect, set the volume and write to REG_PLAY to play the effect.
EVE has a wide range of effects, many of which have variable note selection too, and the table above shows just some of them.
EVE has an audio output pin (stereo output on BT820) which can drive a speaker via an external amplifier. The BT820 also offers I2S as an alternative interface for audio.
Using EVE's audio capabilities, engineers can implement features such as:
- Generating alerts
- Playing feedback tones
- Adding warning notifications
Application Examples:
- EV charging stations
- Medical instruments
- Access control panels
- Smart thermostats
And many more....
#bridgetek #embeddedvideoengine #HMI #GraphicDisplay #HumanMachineInterface #EVE #audio