ESD EvChargePoint demo not working on ESD 4.15.1 or 4.8

[Louis Cloete]

Hi

I'm not getting the EvChargePoint demo to work on either ESD 4.15.1 or 4.8 on the emulator. I'm getting errors during code generation. Do I need any extra tools installed?

I replaced 4.8 with 4.15, since the only reason I had 4.8 is the confusing structure of the FTDI/Bridgetek website migrations.

I can post my errors if necessary.

[BRT Community]

Hello,

Thank you for your question.

I would suggest completely uninstalling both versions on ESD from your machine, then re-installing ESD 4.15.1 just to ensure there are no conflicts in the installation. No other toolchains should be required to run the ESD toolchain.

Once you have completed this step, please share any error messages you may be generating during compilation of the project.

Best Regards,
BRT Community

[Louis Cloete]

I did a complete reinstall of 4.15 and made sure to not accidentally change any settings prior to first building the project as-is. That solved my issue. I think I must have changed some setting accidentally. I do think it's much too easy to accidentally change something, but the example is working now in the emulator.

[BRT Community]

Hello,

Thank you for the update, glad to hear you have the project up and running now!

Please let us know if you have any further queries.

Best Regards,
BRT Community

[Louis Cloete]

I got the demo working with MPSSE and FTDI cable, and then successfully ported to STM32L476RG.