BRT Community

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the Bridgetek Community!

Please read our Welcome Note

Technical Support enquires
please contact the team
@ Bridgetek Support

Please refer to our website for detailed information on all our products - Bridgetek - Bridging Technology

Author Topic: CMD_SYNC in FT81x?  (Read 757 times)

Rudolph

  • Sr. Member
  • ****
  • Posts: 424
    • View Profile
CMD_SYNC in FT81x?
« on: November 10, 2024, 11:00:25 AM »

The BRT_AN_088_FT81x_BT88x-Programming-Guide.pdf v1.0 documents CMD_SYNC for FT81x and BT88x.
But the earlier FT81X_Series_Programmer_Guide.pdf v1.0 does not have this command.

Do FT81x have CMD_SYNC?

Edit: I guess FT81x do have CMD_SYNC, I just noticed that CMD_SETBITMAP is command #0x43 while CMD_SYNC is #0x42.
And #0x44 is CMD_FLASHERASE.
So not mentioning CMD_SYNC in the FT81x documentation is likely an oversight which has been correct with BRT_AN_088.
« Last Edit: November 12, 2024, 12:14:59 PM by Rudolph »
Logged

BRT Community

  • Administrator
  • Hero Member
  • *****
  • Posts: 780
    • View Profile
Re: CMD_SYNC in FT81x?
« Reply #1 on: November 15, 2024, 09:05:47 AM »

Hi Rudolph,

Yes you are correct, CMD_SYNC is available in FT81x and BT88x.

It must have been an oversight but our BRT_AN_088 covers both FT81x and BT88x from now on, to replace the FT81x programmers guide.

Best Regards, BRT Community


Logged

Rudolph

  • Sr. Member
  • ****
  • Posts: 424
    • View Profile
Re: CMD_SYNC in FT81x?
« Reply #2 on: November 15, 2024, 07:22:35 PM »

Thank you for the confirmation, I will shuffle a few bits around in my library then.  :)
Logged